Gas oven are a necessity in most kitchens. But when they stop working, the only alternative is to call a professional appliance maintenance specialist or buy a new oven. Professional oven repairs can be expensive, and the new purchase will also cost a pretty penny.
Before replacing your oven, it might be worth your time to try out some troubleshooting steps yourself. Or, if you are tired of waiting for the repairman to show up, try one of these simple oven troubleshooting techniques.
Here’s a look at some easy-to-follow steps on how to fix your oven:
The broiler is the heating source below the burners, and it will work even if your oven is not heating when the broil setting is selected. You can see it when standing in front of the appliance if the door is open.
When your stove dial indicates otherwise, the oven doesn’t receive any electrical power. Your oven igniter switch could be defective or not receive power because the wires are loose, burned, or broken. This part costs very little to replace yourself. Open the oven door and remove the storage drawer under the oven. This will expose all the wires, screws, bolts, and components that make up your stove.
Locate your appliance’s model number on a sticker somewhere on the back or bottom of it. You can also find this by pulling open one of your stove’s storage drawers, removing the drawer covering, and finding an attached label. Every stove is different, so there are no detailed instructions here on fixing your particular oven model, but all stoves have similar components in common with other appliances.
When you look up the model-specific information for your oven, use keywords like troubleshooting or repair manual to find diagrams, model number breakdowns, and step-by-step instructions for fixing your specific oven.
If you have a gas stove, then an igniter will do the work of lighting the oven burner with just a push of a button. If this part malfunctions, it means spending time standing in front of your stove every time you need to light your oven.
Why my Electric oven not getting hot enough?
Sometimes, you turn on your oven, and it’s not getting hot enough. There is no need to worry about it because there are a few reasons for this malfunctioning of the electric oven. Following are some of the reason that makes Electric oven not heat up while broil works fine:
1) Missing or misplaced control knob for bake/roast:
If the knob is missing or misplaced, it won’t be able to heat your oven. Or if a different one has replaced the knob, broil is for bake/roast, and vice versa. Then this malfunctioning of an electric oven will happen. So make sure that the right knob is placed in the right slot.
2) Broken or misplaced temperature knob:
Sometimes, the temperature knob gets broken. And it won’t let you control the temperature of your oven. If this is happening, then you need to replace the knob immediately. Otherwise, you will have a real problem on your hands!
3) The Bake/Broil fuse is broken:
The bake/broil fuse is responsible for controlling your electric oven. If this particular fuse is not getting activated, it won’t let you control the temperature of your oven. This problem needs to be immediately resolved by an expert technician.
4) A loose wire connection:
If you find loose wires, you need to resolve them with an expert technician immediately. Because loose wire connections are dangerous for users and the appliance itself.
Why is my fan oven not getting up to temperature?
I have set the oven to the highest temperature, and I can see that it is hot, but after 30 mins, it’s still cold when I put something in.
It has been suggested to me by a friend that my fan is not working, and trying to heat up without it will be like trying to light a fire with no oxygen. Does this sound right to you?
I would like to know if this sounds feasible because I have found several websites that mention the same issue but no fix.
Where is the temperature sensor in my oven?
If your gas oven is not heating, but the broiler is working, it may be because you need to change the temperature sensor.
To begin locating the sensor in your oven, start by turning off both burners on your stove and disconnecting them from their source of gas. Then, turn off the pilot light in the center of the stove.
Now, turn the oven on to a lower temperature setting and wait for it to heat up. To do so, turn on the broiler instead of one of the burners below it. The sensor is most likely under this burner because when you use your oven’s broil function, both sides increase in temperature equally.
In some ovens, however, the sensor may be located on a different wall inside of your oven. If you can’t figure out where your sensor is or how to change it, consult the manual that came with your appliance for more information.
How do I know if my gas oven igniter is bad?
Of course, if your oven won’t heat up, you’ll know there’s a problem. But, sometimes the gas oven will heat up but not to the temperature you set it for. Other times it might heat fine until you turn on the broiler, then only the top surface of your food gets cooked while everything else under that area is still frozen solid.
The problem is the oven igniter in your gas oven. If your oven is still under warranty, contact the company you bought it from and explain why it’s not heating up. If the manufacturer finds that your particular model has a bad oven igniter, they will send a technician to replace it for free or at no cost to you.
If your gas oven is still under warranty, rest assured that your particular model has a bad igniter. But if the manufacturer does not cover it, you may need to replace it yourself. This can be done for about $40-$60, depending on where you buy it and how much help you will get while installing it.
Final verdict:
If your electric oven is not getting hot enough, even though broil works fine, try out these reasons given above and let us know in the comment of this article which one worked for you!
